Transmission channels for light in absorbing random media: from diffusive to ballistic-like transport

While the absorption of light is ubiquitous in nature and in applications, the question remains how absorption modifies the transmission channels in random media. We present a numerical study on the effects of optical absorption on the maximal transmission and minimal reflection channels in a two-dimensional disordered waveguide. In the weak absorption regime, where the system length is less than the diffusive absorption length, the maximal transmission channel is dominated by diffusive transport and it is equivalent to the minimal reflection channel. Its frequency bandwidth is determined by the underlying quasimode width. However, when the absorption is strong, light transport in the maximal transmission channel undergoes a sharp transition and becomes ballistic-like transport. Its frequency bandwidth increases with absorption, and the exact scaling varies with the sample's realization. The minimal reflection channel becomes different from the maximal transmission channel and becomes dominated by absorption. Counterintuitively, we observe in some samples that the minimum reflection eigenvalue increases with absorption. Our results show that strong absorption turns open channels in random media from diffusive to ballistic-like.Comment: 11 pages, 7 figure

The Effects of Air and Underwater Blast on Composite Sandwich Panels and Tubular Laminate Structures

The resistance of glass-fibre reinforced polymer (GFRP) sandwich panels and laminate tubes to blast in air and underwater environments has been studied. Procedures for monitoring the structural response of such materials during blast events have been devised. High-speed photography was employed during the air-blast loading of GFRP sandwich panels, in conjunction with digital image correlation (DIC), to monitor the deformation of these structures under shock loading. Failure mechanisms have been revealed by using DIC and confirmed in post-test sectioning. Strain gauges were used to monitor the structural response of similar sandwich materials and GFRP tubular laminates during underwater shocks. The effect of the backing medium (air or water) of the target facing the shock has been identified during these studies. Mechanisms of failure have been established such as core crushing, skin/core cracking, delamination and fibre breakage. Strain gauge data supported the mechanisms for such damage. These studies were part of a research programme sponsored by the Office of Naval Research (ONR) investigating blast loading of composite naval structures. The full-scale experimental results presented here will aid and assist in the development of analytical and computational models. Furthermore, it highlights the importance of support and boundary conditions with regards to blast resistant design

The Comparison of Various Foam Polymer Types in Composite Sandwich Panels Subjected to Full Scale Air Blast Loading

Full scale air blast testing has been performed on a range of polymeric foam composite panels. These panels employed glass fibre reinforced polymer (GFRP) face-sheets with different polymer foam cores, namely: Styrene acrylonitrile (SAN); Polyvinylchloride (PVC) and Polymethacrylimide (PMI). The three sandwich panels were all subjected to 100 kg TNT equivalent blast loading at a stand-off distance of 15 m, and the responses of the panels were measured using Digital Image Correlation (DIC). The extent of damage in the sandwich panels was then inspected via post-blast sectioning, and it was found that the SAN core suffered the least damage, and the PMI suffered the most. The DIC showed that the deflection of the SAN core sandwich panel was much less than the other two foam polymer cores, due to less damage meaning a greater stiffness was retained. All blast research to date is part of a programme sponsored by the Office of Naval Research (ONR)

Investigation of the Dimensional Variation of Microstructures Through the μMIM Process

The mass production of components with dimensions in the micron and sub-micron range is anticipated to be one of the leading technology areas for the present century and to be of high market potential. Micro metal injection molding (μMIM) has the potential to be an important contributor to this industry as it can produce precise metallic microstructures in large quantities at a relatively low production cost. The μMIM process is a miniaturization of metal injection molding (MIM) methods. The process comprises of four main steps: mixing, injection molding, debinding and sintering. A metallic powder is mixed with a binder system to form the feedstock. The feedstock is then injection molded into the required shape and the binder removed via thermal or other means. The final microstructures are obtained by sintering the remaining powder in a controlled environment. In this work, the dimensional variation of the microstructures, in particular the warpage, roughness and volume variation, at each stage of the μMIM process was quantified and compared. The results of a preliminary study of the sensitivity of warpage of the microstructures to the packing pressure are also reported.Singapore-MIT Alliance (SMA

The role of input noise in transcriptional regulation

Even under constant external conditions, the expression levels of genes fluctuate. Much emphasis has been placed on the components of this noise that are due to randomness in transcription and translation; here we analyze the role of noise associated with the inputs to transcriptional regulation, the random arrival and binding of transcription factors to their target sites along the genome. This noise sets a fundamental physical limit to the reliability of genetic control, and has clear signatures, but we show that these are easily obscured by experimental limitations and even by conventional methods for plotting the variance vs. mean expression level. We argue that simple, global models of noise dominated by transcription and translation are inconsistent with the embedding of gene expression in a network of regulatory interactions. Analysis of recent experiments on transcriptional control in the early Drosophila embryo shows that these results are quantitatively consistent with the predicted signatures of input noise, and we discuss the experiments needed to test the importance of input noise more generally.Comment: 11 pages, 5 figures minor correction

Democratization in a passive dendritic tree : an analytical investigation

One way to achieve amplification of distal synaptic inputs on a dendritic tree is to scale the amplitude and/or duration of the synaptic conductance with its distance from the soma. This is an example of what is often referred to as “dendritic democracy”. Although well studied experimentally, to date this phenomenon has not been thoroughly explored from a mathematical perspective. In this paper we adopt a passive model of a dendritic tree with distributed excitatory synaptic conductances and analyze a number of key measures of democracy. In particular, via moment methods we derive laws for the transport, from synapse to soma, of strength, characteristic time, and dispersion. These laws lead immediately to synaptic scalings that overcome attenuation with distance. We follow this with a Neumann approximation of Green’s representation that readily produces the synaptic scaling that democratizes the peak somatic voltage response. Results are obtained for both idealized geometries and for the more realistic geometry of a rat CA1 pyramidal cell. For each measure of democratization we produce and contrast the synaptic scaling associated with treating the synapse as either a conductance change or a current injection. We find that our respective scalings agree up to a critical distance from the soma and we reveal how this critical distance decreases with decreasing branch radius

Rubber Impact on 3D Textile Composites

A low velocity impact study of aircraft tire rubber on 3D textile-reinforced composite plates was performed experimentally and numerically. In contrast to regular unidirectional composite laminates, no delaminations occur in such a 3D textile composite. Yarn decohesions, matrix cracks and yarn ruptures have been identified as the major damage mechanisms under impact load. An increase in the number of 3D warp yarns is proposed to improve the impact damage resistance. The characteristic of a rubber impact is the high amount of elastic energy stored in the impactor during impact, which was more than 90% of the initial kinetic energy. This large geometrical deformation of the rubber during impact leads to a less localised loading of the target structure and poses great challenges for the numerical modelling. A hyperelastic Mooney-Rivlin constitutive law was used in Abaqus/Explicit based on a step-by-step validation with static rubber compression tests and low velocity impact tests on aluminium plates. Simulation models of the textile weave were developed on the meso- and macro-scale. The final correlation between impact simulation results on 3D textile-reinforced composite plates and impact test data was promising, highlighting the potential of such numerical simulation tools

Experimental Study on the Low-velocity Impact Behavior of Foam-core Sandwich Panels

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97064/1/AIAA2012-1701.pd